CE Certification Pure Sine Wave Power Station Exporter - Portable Power Station CJPCL-1000 – C&J

Main Application

The Portable Power Station solves battery starting problems for any application which makes use of an internal combustion engine:
■the car emergency start; ■Motorbikes;
■Go carts,snowmobiles; ■Generators;
■Commercial Trucks; ■Boats, watercrafts;
■Gardening and agricultural vehicles;
■as an uninterruptible power source for outdoor office use, can be linked to mobile phones, tablets, laptops and other digital devices;
■outdoor photography, off-road lovers of outdoor electricity, leisure and entertainment outdoor electricity;
■Increase the endurance of UAVs in outdoor operation and improve the efficiency of UAVs in outdoor operation.

Charging way

Before using or storing the product, please use the charger to charge. The indicator light is blue when charging.
The LCD screen will display the current charging ratio and charging power. When the LCD screen shows 100% power
Is full of. The charging process takes about 5 hours. You can view the current power on the LCD screen.
■Standard charger (about 5 hours)
■Generator power (about 5 hours with standard charger)
■Car charger (approx. 6 hours)
■Built-in Super fast charge (customizable, about 2.2 hours)
■100W solar photovoltaic panel (about 8 hours, the charging time is determined by the solar illumination intensity, and the MPPT function of solar photovoltaic panel is supported to charge 12-30V)

Product Features

■Over charge protection
■Over power protection
■Over voltage protection
■Short circuit protection
■Recovery protection
■Multiple security protection

■Over discharge protection
■Over current protection
■Temperature protection
■Electromagnetic field protection
■Wid compatibility
■Pure sine wave

Product Parameter

FAQ

1. Can the product be carried on the plane?
No, because this product is lithium battery product, according to the international air transport standard regulations, carrying lithium battery product can not exceed 100Wh.

2. The equipment power is within the rated output range of the product but cannot be used?
A. If the battery power of the product is lower than 20%, the battery life will be affected if the battery is not charged in time.
B. The startup power of some devices is greater than the peak power of the product. For inductive load, the startup power must be 2-3 times greater than the nominal power.

3. Why does it sound when it is used?
The product adopts air cooling system, and the built-in fan can better help the product to dissipate heat. It is normal to have slight noise during use.

4. Does the charger heat normally during charging?
It is normal for the charger to heat up when charging. The standard charger meets the national safety standards. You can rest assured to use it!

5. Why does output sometimes shut down early or fail to start again?
When the nominal power is exceeded or the power is insufficient, overload protection and undervoltage protection will be implemented.
Solution: Recharge and restore.