CJX2-95 AC Electrical Contactor 4pole Magnetic Contactor

Short Description:

CJX2 AC Contactor is suitable for using in the circuits up to the rated voltage 660v, AC 50hz or 60hz,rated current up to 95A, for making, breaking frequently starting &machine-interlocking device etc, it becomes the dalay contactor, mechanical interlocking contactor, star-delta starter. with the thermal relay, it is combined into the electromagnetic starter. The contactor is produced according to IEC947-2, VDE0660&BS5442

Send email to us

Product Detail

Product Tags

Product Parameter

Type		CJX2-10	CJX2-12	CJX2-18	CJX2-25	CJX2-32	CJX2-40	CJX2-50	CJX2-65	CJX2-80	CJX2-95
Rated working current(A)	AC3	9	12	18	25	32	40	50	65	80	95
Rated working current(A)	AC4	3.5	5	7.7	8.5	12	18.5	24	28	37	44
Standard power ratings of 3phase motors 50/60Hz in Category AC-3(kW)	220/230V	2.2	3	4	5.5	7.5	11	15	18.5	22	25
	380/400V	4	5.5	7.5	11	15	18.5	22	30	37	45
	415V	4	5.5	9	11	15	22	25	37	45	45
	500V	5.5	7.5	10	15	18.5	22	30	37	55	55
	660/690V	5.5	7.5	10	15	18.5	30	33	37	45	55
Rated Heat Current (A)		20	20	32	40	50	60	80	80	125	125
Electrical Life	AC3 (X10⁴)	100	100	100	100	80	80	60	60	60	60
Electrical Life	AC4 (X10⁴)	20	20	20	20	20	15	15	15	10	10
Mechanical life (X10⁴）		1000	1000	1000	1000	800	800	800	800	600	600
Number of the contacts				3P+NO				3P+NC+NO
Number of the contacts				3P+NC				3P+NC+NO

Standard Control Circuit Voltage

Volts

110

220

230

240

380

400

415

440

500

600

50Hz

60Hz

50/60Hz

Environment Condition for Operation and Installation

Ambient temperature: -5ºC~+40ºC
Altitude: ≤2000m
Relative humidity: The maximum temperature of 40 degrees, the air relative humidity not exceed 50%, at a lower temperature can allow for a higher relative humidity, if humidity changes as a result of occasional gel generated,should eliminate it
Pollution level: 3
Installation category: III
Installation position: The installation degree of the tilt and vertical plane should not exceed ±22.5°, should be installed in place with no significant impact shaking and vibration
Installation: The installation of fastening screws can be used,the CJX1-9~38 contactor can also be installed on 35mm standard DIN rail

Outline and Mounting Dimension(mm)

product-description1

Type	A	B	C	D	E	a	b	Φ
CJX2-D09~12	47	76	82	113	133	34/35	50/60	4.5
CJX2-D18	47	76	87	118	138	34/35	50/60	1.5
CJX2-D25	57	86	95	126	146	40	48	4.5
CJX2-D32	57	86	100	131	151	40	48	4.5
CJX2-D40-65	77	129	116	145	165	40	100/110	6.5
CJX2-D80-95	87	129	127	175	195	40	100/110	6.5