• nybjtp

Factory making 2p 100A 110V a-N Phase 0.008s Second Change Over Source Uninterrupt Automatic Transfer Switch

Short Description:

  • CJQ3 series Automatic transfer switch mainly used for distribution or electromotor network, which under voltage 400V, rated voltage DC 220V, Rated current 63A-3200A.
  • Main power and standby power or mutual standby power change over system or city power and generator group overload switch-over. At the same time, it can operated under un-frequency on and off circuit act as disconnector.Widely used at the field of important power supply site, which transport, distribution power supply system and automatization system. For fire protection,hospital,bank,building,etc, where doesn’t allow power off.

Product Detail

Product Tags

We stick to our enterprise spirit of “Quality, Performance, Innovation and Integrity”. We purpose to create a lot more price for our prospects with our rich resources, innovative machinery, experienced workers and great products and services for Factory making 2p 100A 110V a-N Phase 0.008s Second Change Over Source Uninterrupt Automatic Transfer Switch, should you might have any query or wish to place an initial get be sure to usually do not wait to get hold of us.
We stick to our enterprise spirit of “Quality, Performance, Innovation and Integrity”. We purpose to create a lot more price for our prospects with our rich resources, innovative machinery, experienced workers and great products and services for China Rotary Switch and Micro Switch, With top quality goods, great after-sales service and warranty policy, we win trust from many overseas partner, many good feedbacks witnessed our factory’s growth. With full confidence and strength, welcome customers to contact and visit us for future relationship.

What is dual power automatic transfer switch?

  • Dual-power automatic transfer switch is microprocessor, which is used to start and switch between grid power and grid power or between grid power and generator power supply in power grid system. It can supply power continuously. Series of dual power supply, when the common use of sudden failure or power outage, through the dual power automatic transfer switch, automatically put into the standby power supply (under small load standby power supply can also be supplied by generators), so that the equipment can still operate normally. The most common are elevators, fire protection, monitoring, lighting and so on.When the generator set is used as emergency lighting power supply, the start-up time and power conversion time of the generator should not exceed 15s. Double power automatic switching switch should choose “city power – generator conversion” special type.
  • Dual-power automatic transfer switch has the functions of short circuit and overload protection, over-voltage, under-voltage, phase-gap automatic conversion and intelligent alarm, automatic conversion parameters can be set freely outside, and intelligent protection of operating motor. When the fire control center gives a control signal to the intelligent controller, two circuit breakers enter the sub-unit. In the gate state, the computer network interface is reserved for the realization of remote control, remote adjustment, remote communication, remote measurement and other four remote functions.

 

Technical Data

Conventional thermal current(Ith) 100A 250A 630A 1000A 1600A
Rated Current(In) 20A 40A 60A 80A 100A 125A 160A 250A 400A 630A 800A 1000A 1250A 1600A
Rated insulation voltage(Ui) 750V 1000V
Rated concussion withstand voltage(Uimp) 8KV 12KV
Rated working voltage(Ue) AC440V
Rated working current(Ie) AC-31A 20 40 63 80 100 125 160 250 400 630 800 1000 1250 1600
AC-35A 20 40 63 80 100 125 160 250 400 630 800 1000 1250 1600
AC-33A 20 40 63 80 100 125 160 250 400 630 800 1000 1250 1600
Rated connection capacity 10le
Rated breaking capacity 8le
Rated limited short-circuit current(ls) 50kA 70kA 100kA 120kA
Rated short-time withstand current(ls) 7kA 9kA 13kA 26kA 50kA
Transfer I-II or II-I 0.45s 0.6s 1.2s
Control Power voltage DC24V. 48V. 110V. AC220V
Electrical consumption
Rated frequency Start 300W 325W 355W 400W 440W
Normal 55W 62W 74W 90W 98W
Weight(kg) 4 pole 7 7.2 7.2 7.2 7.5 7.5 8.8 9 16.5 17 32 36 40 43

CJQ3Automatic Transfer Switch for Portable Generator ATS (5)

FAQ

Q1:Are you a trading company or manufacturer?
A.We are professional manufacturer for low-voltage circuit breaker series products,Integrates research and development, manufacturing, processing and trade departments together. also we supply of different electrical and electronic items

Q2: why will you choice us :
A.more than 20years of professional teams will give you good quality products ,good service ,and reasonable price

Q3: Is the MOQ fixed?
A.The MOQ is flexible and we accept small order as trial order.
….

Dear Customers,
If you have any question , please feel free to contact with me , I will send you our catalog for your reference.

 We stick to our enterprise spirit of “Quality, Performance, Innovation and Integrity”. We purpose to create a lot more price for our prospects with our rich resources, innovative machinery, experienced workers and great products and services for Factory making 2p 100A 110V a-N Phase 0.008s Second Change Over Source Uninterrupt Automatic Transfer Switch, should you might have any query or wish to place an initial get be sure to usually do not wait to get hold of us.
Factory making China Rotary Switch and Micro Switch, With top quality goods, great after-sales service and warranty policy, we win trust from many overseas partner, many good feedbacks witnessed our factory’s growth. With full confidence and strength, welcome customers to contact and visit us for future relationship.


  • Previous:
  • Next:

  • Write your message here and send it to us