Factory price CJDPV-32X Solar PV DIN Rail DC1000V DC1500V 10X38mm 1p 32A Fuse Holder

Short Description:

CJDPV series fuse holder is made of refractory material, and meets the standard of IEC 60947-3. The maximum rated voltage is 1000V and the maximum current is 30A. As a short circuit and over-current protector, it is widely used in the high and low voltage distribution system, control system, and electrical equipments, like distribution box and inverter.

Send email to us

Product Detail

Product Tags

Product Benefits

DIN35 Rail Installation, Easy to Install
Adjustable terminal block, Wiring firm
Fire-retardant shell, high temperature resistance
Flexible installation, Easy to replace

Technical data

Standard	IEC60947-3
PV DC CDFH Fuse Holder Pole	1P
Rated Working Voltage	1000VDC
Rated Current	30A
Breaking Capacity	20kA
Max Power Dissipation	3W
Connection and InstallationWire	2.5mm²-6.0mm²
Terminal Screws	M3.5
Torque	0.8~1.2N.m
Degree of Protection	IP20
Fuse Size	10x38mm
Operating Temperature Range	-30°C~+70°C
Mounting	DIN rail IEC/EN 60715
Pollution Degree	3
Relative Humidity	+20°C ≤95%, +40°C ≤50%
Installation Class	III
Weight	0.07kg Per pole

Photovoltaic Fuses 10x38mm

Product Benefits

Amps:1~32A; Volts: 1000VDC;Breaking Capacity:30kA
Compact design.Low power loss.Excellent DC performance
Low arc voltage and low energy let-through(I2t)
Product storage temperature: -40°C~120°C. At 40°CC, the relative humidity is not more than 70%, below 30°C, not more than 80%, below 20°C, not more than 90%
Packaging and storage temperature: -40°C~80°C. The relative humidity is not more than 90%, and there is no condensation

Vibration and Shock Resistance

It has good resistance to vibration and impact, and can withstand more than 20g Comply with the IT application environment of rail transit and the use of general motor vehicles.
In the application environment with strong vibration, the corresponding test can be negotiated, which generally needs a long period.

Altitude

2000 – 4500m
Higher altitude mainly leads to insulation deterioration, heat dissipation condition deterioration and air pressure change.

A) The temperature rise of the fuse increases by 0.1-0.5k every 100m above sea level.
B) For every 100m increase in altitude, the average ambient temperature decreases by about 0.5K.
C) In open environment, the influence of altitude on rated current can be ignored.
D) When used in a closed environment, if the air temperature or box temperature does not decrease with the increase of altitude and still reaches more than 40°C, the rated current needs to be reduced. The rated current shall be reduced by 2%-5% for every 1000m increase in altitude.

Effect of altitude on air insulation strength (breakdown strength)

A) Within 2000-4500m, the insulation strength decreases by 12-15% for every 1000m increase in altitude
B) the insulation gap between the fuse and other live structures and to the ground shall be considered by the user.