HDR-60-24 High Quality Hot Sale 60W DIN Rail Industrial Single Output Switching Power Supply

Short Description:

Features

High Efficiency and Factory Price
100% full load burn-in test
Low output ripple and noise
Direct Manufacturer
Protection: Over load/Over voltage/Short circuit/Over Temperature

Product Detail

Product Tags

Technical Data

Model	HDR-60-5	HDR-60-12	HDR-60-15	HDR-60-24	HDR-60-48
DC Voltage	5V	12V	15V	24V	48V
Rated Current	6.5A	4.5A	4A	2.5A	1.25A
Current Range	0 ~ 6.5A	0 ~ 4.5A	0 ~ 4A	0 ~ 2.5A	0 ~ 1.25A
Rated Power	32.5W	54W	60W	60W	60W
Ripple & Noise (max.) Note.2	80mVp-p	120mVp-p	120mVp-p	150mVp-p	240mVp-p
Voltage Adj. Range	5.0 ~ 5.5V	10.8 ~ 13.8V	13.5 ~ 18V	21.6 ~ 29V	43.2 ~ 55.2V
Voltage Tolerance Note.3	±2.0%	±1.0%	±1.0%	±1.0%	±1.0%
Line Regulation	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%
Load Regulation	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%
Setup, Rise Time	500ms, 50ms/230VAC 500ms, 50ms/115VAC at full load
Hold Up Time (Typ.)	30ms/230VAC 12ms/115VAC at full load
Voltage Range	85 ~ 264VAC (277VAC operational ) 120 ~ 370VDC (390VDC operational )
Frequency Range	47 ~ 63Hz
Efficiency (Typ.)	85%	88%	89%	90%	91%
AC Current (Typ.)	1.2A/115VAC 0.8A/230VAC
Inrush Current (Typ.)	COLD START 30A/115VAC 60A/230VAC
Over Load	105 ~ 160% rated output power
	Hiccup mode when output voltage <50%, recovers automatically after fault condition is removed
	Constant current limiting within 50% ~100% rated output voltage, recovers automatically after fault condition is removed
Over Voltage	5.75 ~ 6.75V	14.2 ~ 16.2V	18.8 ~ 22.5V	30 ~ 36V	56.5 ~ 64.8V
Over Voltage	Protection type : Shut down o/p voltage, re-power on to recover
Working Temp.	-30 ~ +70ºC (Refer to “Derating Curve”)
Working Humidity	20 ~ 90% RH non-condensing
Storage Temp., Humidity	-40 ~ +85ºC, 10 ~ 95% RH non-condensing
Temp. Coefficient	±0.03%/ºC (0 ~ 50ºC) RH non-condensing
Vibration	10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
Operating Altitude	2000 meters
Withstand Voltage	I/P-O/P:4KVAC
Isolation Resistance	I/P-O/P:100M Ohms / 500VDC / 25ºC/ 70% RH
MTBF	927.6K hrs min. MIL-HDBK-217F (25ºC)
Dimension	52.59054.5mm (WHD)
Packing	190g;60pcs/12.4Kg/0.97CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1μf & 47μf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”
5. The ambient temperature derating of 3.5ºC/1000m with fanless models and of 5ºC/1000m with fan models for operating altitude higher than 2000m(6500ft).