We goal to see good quality disfigurement within the manufacturing and provide the most effective support to domestic and overseas shoppers wholeheartedly for High Quality Professional Mamufacturer RCCB Series 2 Pole Residual Current Circuit Breaker 10mA 30mA 100mA, We’re going to empower people by communicating and listening, Setting an example to others and learning from experience.
We goal to see good quality disfigurement within the manufacturing and provide the most effective support to domestic and overseas shoppers wholeheartedly for China RCCB and RCCB Circuit Breaker, We aim to become the modern enterprise with the commercial ideal of “Sincerity and confidence” and with the aim of “Offering customers the most sincere services and best quality products”. We sincerely ask for your unchanged support and appreciate your kind advice and guidance.
CJBF-40 series miniature circuit breaker is a new type product researched and developed by our company depend ently on the basis of absorbing overseas advanced technologies. It complies with the standards GB16917.1 and IEC61009-1.The products are featured with small volume, high breaking apacity of 10KA,neutral breaking function, etc, are widely applied to low-voltage electric systems of AC50 HZ, rated voltage of 230V and rated current not exceed 63A,protect the human body against electric hock,and protect the building and similar purposed circuit equipment against over-current or short circuit.The products also can be used to prevent fire danger caused by earthing fault current due to the damage of insulation of circuits and electrical equipment.The product also has wide current range, up to 63A is available, instead of two pole and medley pole products,saves space.
The circuit breaker should be wired according to the polarity marks, the positiveand negative polarities of power supply should be absolutely proper. Power incoming terminal of circuit breaker is “1” (1P) or “1,3” (2P), loadterminal is “2” (1P) or “2” (positive end of load),4 ( negative end of load)(2P), don’t make wrong connnection.
When placing an order, please give clear indications on model, rated current value, tripping type, pole number and quantity of circuit breaker e.g: DAB7-63/DC miniature direct current circuit breaker,rated current is 63A tripping type is C, two-pole, C type 40A, 100 pieces, then it can be expressed as: CJBF-63/DC/2-C40100pcs.
Standard | IEC61009/EN61009 | |||||||
Poles of number | 1P+N/2P | 3P+N/4P | 2P | 3P+N/4P | ||||
Rated current ln A | 6-63A | 6-32A | 6-63A | 40-63A | ||||
Rated voltacje(Ue) | 230V/400V,50HZ | |||||||
Rated current In | 6-63A | |||||||
Release features | B,C,D features curves | |||||||
Shell protection grade | lP40( Afier instaiiation) | |||||||
Ratedbreak capacity lcn | 10kA(CJBF-40),6kA(CJBF-63) | |||||||
Rated residual action current | 10mA 30mA,50mA 100mA, 300mA | |||||||
Maximum available fuse | 100AgL( >10KA) | |||||||
Climatic conditions resistance | According to IEC1008 in L standard | |||||||
Total life | 180000 times of operation | |||||||
Lifespan | No less than 6000 times on-offaction | |||||||
No less than 12000 times on-off action | ||||||||
Release type | Magnetic type | |||||||
Functions | Protection against short circuit, leakage, overload, over voltage, isolation |
|||||||
Type of residual current | AC and A | |||||||
Rated frequency f Hz | 50-60Hz | |||||||
Rated working voltage Ue VAC | 230/400 | |||||||
Rated residual current I△n mA | 10,30,100,300 | |||||||
Insulation voltage Ui | 500V | |||||||
Rated impulse withstand voltage Uimp | 6KV | |||||||
Instantaneous tripping type | B/C/D | |||||||
Rated short circuit lcn(kA) | CJBF-40 10KA, CJBF-63 6KA | |||||||
Mechanical | 12000 | |||||||
Electrical | 6000 | |||||||
Protection degree | IP40 | |||||||
Wire mm² | 1~25 | |||||||
Working temperature (with daily average≤35℃) | -5~+40℃ | |||||||
Resistance to humidity and heat | Class 2 | |||||||
Altitude above sea | ≤2000 | |||||||
Relative humidity | +20℃, ≤90%; +40℃,≤50% | |||||||
Pollution degree | 2 | |||||||
Installation environment | Avoid obvious shock and vibration | |||||||
Installation class | Class II, Class III | |||||||
Auxiliary contact | √ | |||||||
Alarm contact | √ | |||||||
ALT+AUX | √ | |||||||
Shunt release | √ | |||||||
Under voltage release | - | |||||||
Over voltage release | √ |
Q1: Are you a trading company or manufacturer?
We are professional manufacturer for low-voltage circuit breaker series products,Integrates research and development, manufacturing, processing and trade departments together. also we supply of different electrical and electronic items
Q2: Why will you choice us
more than 20years of professional teams will give you good quality products ,good service ,and reasonable price
Q3: Can we have our logo or company name to be printed on your products or the package?
We offer OEM , ODM . our designer can make special design for you .
Q4: Is the MOQ fixed?
The MOQ is flexible and we accept small order as trial order.
Q5: Can I have a visit to you before the order?
You are welcome to visit our company our company is only one hour by Air from shanghai
Dear Customers
If you have any question, please feel free to contact with me, I will send you our catalog for your reference.We goal to see good quality disfigurement within the manufacturing and provide the most effective support to domestic and overseas shoppers wholeheartedly for High Quality Professional Mamufacturer RCCB Series 2 Pole Residual Current Circuit Breaker 10mA 30mA 100mA, We’re going to empower people by communicating and listening, Setting an example to others and learning from experience.
High Quality China RCCB and RCCB Circuit Breaker, We aim to become the modern enterprise with the commercial ideal of “Sincerity and confidence” and with the aim of “Offering customers the most sincere services and best quality products”. We sincerely ask for your unchanged support and appreciate your kind advice and guidance.