Made in China CJX2F-225 Series 3P 225A Large Capacitty Contactor Magnetic Telemecanique AC Contactor

Normal operating conditions and installation condition

• Ambient air temperature: -5°C~+40°C, the average value should not exceed +35°C within 24 hours.
• Elevation: No more than 2000m.
• Atmospheric conditions: The relative humidity of atmosphere should not exceed 50% at +40°C; When temperature is relatively low, relative humidity can be higher. While Monthly maximum relative humidity could be not more than 90% and special measures should be taken due to occurrence of dew.
• Class of pollution: Class 3.
• Installation category: Class lll.
• Assembling conditions: The inclination of the mounting surface and the vertical plane should not be more than ±5°.
• Impact shock: The product should be installed and used in places where there is no significant shaking, impact and vibration.

Main technical data and performance

• Main specification of contactor
• By current level: 115A, 150A, 185A, 225A, 265A, 330A, 400A, 500A, 630A, 800A.
• According to the rated control power supply voltage Us of the contactor coil, it is divided into: AC 50Hz or 60Hz, 110V, 127V, 220V, 380V; DC 48V, 110V, 220V.

Basic technical data of contactor (Table 1)

Model and parameters of auxiliary contact group(Table 2)

Performance characteristic
·Pull-in voltage is 85%~110%,US
·The common contactor’s release voltage is 20%~75%Us,the energy-saving product’s release voltage is 10%~75%Us
·CJX2F contactor’s rated impulse withstand voltage is 8KV; Rated limit short circuit current is 50KA and the compatible type with SCPD is type-l.

Coil main specification code (Table 3,4)

Annotation: only coils of 3 poles and 4 poles products of CJX2F-330 and CJX2F-400 are compatible.