Wholesale price CJC-25A 2P 230V Magnetic Contactor Modular contactor for household

Short Description:

CJC-25/CJC-63/CJC-100 AC Contactor(Contactor for short) is mainly designed for AC 50Hz or 60Hz Circuits with 230V rated operating voltage.In AC-7a usage,rated operating voltage up to 230V,rated operating current up to 100A,it functions as long distance breaking and circuit controlling.This product is mainly applied to household appliances or low inductance loading and home electromotor loading control used for the similar purpose.

Send email to us

Product Detail

Product Tags

Structure

This kind of contactor belongs to the terminal product which holding the following characteristics:normalization of installation,modularization of dimension,artistic appearance and safe for use, In addition, it adopts the equipment of direct-acting configuration.

Application instruction

Check whether the contactor agrees with the scope of application and the working condition before installation.
During the process of instaling, pull down the motion-stopping component and put the contactor on the safe orbit,then push up the motion-stopping component to fix the contactor on the safe orbit avoid loosening and dropping.Pull down the motion-stopping component if you want to remove the contactor.

Caution

Make sure the correct mode of connection
Screw down the binding screw during the connection.

Normal working and installation conditions

Ambient temperature:-5°C to +40°C,the average temperature no more than +35°C in 24 hours.
Altitude:no more than 2,000m.
Atmospheric condition: the relative humidity of the installation place should be no more than 50% when the manximum temperature is +40°C; if under a lower temperature, a higher relative humidity is allowed. The monthly average minimum temperature in the wetest month should not exceed +25°C and the monthly average maximym relative humidity of this month no more than 90%.Besides, the dew on the surface of oroducts caused by temperature change should be taken into consideration.·
Class of pollution: class 2.
Installation condition: class Il.
Installation mode: use the installation orbit of “Top Cap” section TH35-7.5 mould.

Types of contactor and relevant data

Type	Rated insulation voltage(V)	Rated operating voltage(V)	Rated heating current(A)	Rated operating current(A)	Control power (kW)
AC1.AC7a Ac7b	500	230	100	100/40	22/6
AC1.AC7a Ac7b	500	230	80	80/30	16.5/4.8
AC1.AC7a Ac7b	500	230	63	63/25	13/3.8
AC1.AC7a Ac7b	500	230	40	40/15	8.4/2.4
AC1.AC7a Ac7b	500	230	32	32/12	6.5/1.9
AC1.AC7a Ac7b	500	230	25	25/8.5	5.4/1.5
AC1.AC7a Ac7b	500	230	20	20/7	4/1.2

Operating Condition
Under the environmental temperature of -5°C~+40°C,puts rated controlling power voltage(Us) on the coil of contactor so as to make it heat to ready state,and the contactor wil close under any voltage in the range of 85%~110%.The voltage it releasing wil neither higher than 75% Us nor lowe than 20%(Us).

Switching on and segmenting ability

Type	Switching on and segmenting condition			Pick-up time (s)	Interval (s)	Operation frequency
Type	Ic/le	Ur/Ue	CosΦ	Pick-up time (s)	Interval (s)	Operation frequency
AC-1,AC-7a	1.5	1.05	0.8	0.05	10	50
AC-7b	8	1.05	0.45	0.05	10	50

Operating performance

Type	On condition			Segment condition			Pick-up time(s)	Interval (s)	Operation frequency
Type	Ic/le	Ur/Ue	CosΦ	Ic/le	Ur/Ue	CosΦ	Pick-up time(s)	Interval (s)	Operation frequency
AC-1	1	1.05	0.8	1	1.05	0.8	0.05	10	6000
AC-7a	1	1.05	0.8	1	1.05	0.8	0.05	10	30000
AC-7b	6	1	0.45	1	0.17	0.45	0.05	10	30000